3: Using the Web Interface
26 Verint Video Intelligence Solutions
Local IP Address—The unique IP address of the device on the network. The IP address
format is a 32-bit numeric address written as four numbers separated by periods. Each
number is in the 0–255 range. Each device on a network must have a unique IP
address.
Subnet Mask—The binary configuration specifying in which subnet the IP address of the
device belongs. A subnet is a portion of a network that shares a common address
component. Unless otherwise specified by your network administrator, it is
recommended to use a subnet mask of 255.255.0.0.
Gateway—The IP address of the network point that acts as an entrance to another
network. Never use the IP address of the device as the gateway value.
Host Name—An alias for the IP address of the device. It is made up of 2 to
24 alphanumerical characters; the first one must be a character. This parameter is
optional.
For more information about these settings, contact your network administrator.
Video
You can configure parameters relative to the encoding of video in the camera. For more
information about the video parameters, refer to the SConfigurator User Guide.
Common
The parameters common to all video functions of a transmitter are:
Video Standard—The analog display standard.
Note: It is up to the DHCP server to register the host name in the DNS server.
Note: The NTSC cameras cannot use the PAL standard, and vice versa.
To Next Page
Loading...
Need help?
General
