C: CLI Access
42 Verint Video Intelligence Solutions
Entering the CLI
You can access the CLI with the SConfigurator tool, through the Telnet utility.
To enter the CLI with Telnet through SConfigurator:
1. Open SConfigurator.
2. In the Units tab, discover the devices.
3. Select the desired device, then click Telnet.
The CLI main menu appears in the Verint Console window.
The CLI has a timeout that is triggered after three minutes of inactivity. When the
timeout occurs:
You lose access to the command line.
The “Thank you for using the Verint CLI” message appears at the command line.
The Verint Console window becomes disabled.
The Disconnect button switches to Connect.
4. To reactivate the CLI after a timeout, click Connect.
5. To work through the CLI menu structure, follow these guidelines:
To execute a command or open a menu, type in the corresponding letter or number,
then press Enter.
To return to the previous menu, enter p.
Note: Ensure that your computer and the S2750e device are in the same IP subnet.
To Next Page
Loading...
Need help?
General
