3: Using the Web Interface
34 Verint Video Intelligence Solutions
Maintaining the Device
You can perform maintenance tasks on the S2750e:
Reboot—To restart the device, while keeping its configuration.
Load—To assign the factory default settings to the device. You may keep some values
by checking the Keep Network Settings box.
Keep Network Settings—To keep the following values when loading the device with its
default settings:
DHCP usage
IP address
Subnet
Gateway
DNS servers
Host name
Ping request target
Ping request size
Update—To upgrade the firmware of the device.
To update the firmware of the device:
1. In the navigation pane, click Maintenance.
To Next Page
Loading...
Need help?
General
