32
EN
Plastic cover
Screws
Hinge
Cover plate
Door bush
9
10
9. Install the door of the appliance. Move the door
bush from the top right side of the refrigerator door
to the top left side of the door. Move the cover
plate from the left hole to the right.
10. Install the upper hinge and the hinge cover on the
left side of the appliance. Install the plastic covers
of the hinge openings in the holes at the top right
of the freezer to cover the screw holes.
When tting the door, make sure the top of the door is level with the top of the appliance. If the door is not level, the
rubber gasket does not seal properly, which can cause malfunctions.
NOTE
To Next Page
Loading...