Table 1-1
Supported data transfer methods for NetBackup
appliances (continued)
OperationTargetSourceMethod
Optimized duplication (See note below
table.)
5020/503052xx/53xxFC
Auto Image Replication. (See note below
table.)
5020/503052xx/53xxFC
Optimized duplication5020/50305020/5030FC
Auto Image Replication5020/50305020/5030FC
Media server deduplication52xx/53xxSAN ClientFC
Optimized duplication52xx/53xx52xx/53xxTCP/IP
Auto Image Replication52xx/53xx52xx/53xxTCP/IP
Optimized duplication5020/503052xx/53xxTCP/IP
Auto Image Replication5020/503052xx/53xxTCP/IP
Optimized duplication5020/50305020/5030TCP/IP
Auto Image Replication5020/50305020/5030TCP/IP
Optimized duplication52xx/53xx5020/5030TCP/IP
Note: For deduplication operations, the 5220, 5230, 5240, 53xx and the 5340
appliances can also leverage FC connectivity to directly communicate with the 5020
and 5030 appliances. For more information, refer to the following topic:
See “Configuring direct backups from a NetBackup 52xx or 53xx appliance to a
NetBackup 50xx appliance using Fibre Channel” on page 74.
Table 1-2 describes the unsupported data transfer methods for NetBackup
Deduplication and NetBackup appliances.
Table 1-2
Unsupported data transfer methods for NetBackup appliances
OperationTargetSourceMethod
Optimized duplication52xx/53xx5020/5030FC
Auto Image Replication52xx/53xx5020/5030FC
Client-side deduplication5020/5030SAN ClientFC
13Introducing Fibre Channel support on NetBackup Appliance
Supported data transfer methods for NetBackup appliances
To Next Page
Loading...
Need help?
General
