VERITAS Rubina User Manual (English)

Other manuals for VERITAS Rubina

Questions and Answers:

A
Alyssa MarquezJul 27, 2025
Why does the upper thread keep breaking on my VERITAS Rubina Sewing Machine?
- A
  acastanedaJul 27, 2025
  If the upper thread of your VERITAS Sewing Machine breaks, consider these potential causes: * The machine might not be threaded correctly, so rethread it. * The thread tension could be too tight; reduce it. * The thread may be too thick for the needle; select a larger needle. * The needle might not be inserted correctly; remove and reinsert it with the flat side towards the back. * The thread could be wound around the spool holder pin; remove the spool holder and unwind the thread. * The needle may be damaged; replace it.
G
Gabriel FlynnJul 31, 2025
How to fix loose stitches on VERITAS Rubina Sewing Machine?
- W
  warmstrongAug 1, 2025
  If you're experiencing loose stitches with your VERITAS Sewing Machine, here are a few things to check: * Ensure the machine is correctly threaded. * Verify the bobbin case is threaded as illustrated in the manual. * Make sure the needle size suits the fabric and thread you're using. * Correct the thread tension if it's wrong.
W
williamsmarkAug 5, 2025
What to do if my VERITAS Sewing Machine is skipping stitches?
- M
  Melissa JohnsonAug 5, 2025
  If your VERITAS Sewing Machine is skipping stitches, consider the following: * Ensure the needle is correctly inserted (flat side towards the back). * Replace the needle if it's damaged. * Use the correct size needle for the thread. * Check that the presser foot is correctly attached. * Rethread the machine. * Firmly tighten the needle clamp screw with a screwdriver.
P
Paul Adams IIIAug 8, 2025
Why is the lower thread breaking on my VERITAS Sewing Machine?
- L
  Laura FisherAug 9, 2025
  If the lower thread breaks on your VERITAS Sewing Machine, check the following: * Remove and reinsert the bobbin case, then pull on the thread. It should pull easily. * Check both the bobbin and bobbin case to ensure they are threaded correctly.
M
Megan NewmanAug 13, 2025
Why is my VERITAS Rubina Sewing Machine seam puckering?
- S
  stonelindaAug 13, 2025
  If the seam is puckering on your VERITAS Sewing Machine, consider these solutions: * Loosen the needle thread tension. * Rethread the machine. * Choose a needle suitable for the thread and fabric. * Shorten the stitch length.
J
Jeremy ChurchAug 17, 2025
Why is the seam gathering on my VERITAS Rubina Sewing Machine?
- S
  Sharon EvansAug 17, 2025
  If the seam is gathering or puckering on your VERITAS Sewing Machine, here's what you can do: * Select a finer needle. * Readjust the stitch length. * Loosen the thread tension.
L
Lisa HowellAug 22, 2025
What to do if my VERITAS Rubina jams?
- B
  Blake WashingtonAug 22, 2025
  If your VERITAS Sewing Machine jams, it might be due to thread caught in the hook. To resolve this, remove the upper thread and bobbin case. Then, turn the handwheel backwards and forwards by hand to remove any thread remnants.

VERITAS Rubina Specifications

General

Adjustable Stitch Length	Yes
Adjustable Stitch Width	Yes
Maximum Stitch Width	7 mm
Reverse Sewing	Yes
Display	LCD
Start/Stop Button	Yes
Speed Control	Yes
Warranty	2 years
Type	Electronic
Bobbin Type	Drop-in
Needle Threader	Automatic

Summary

Important Safety Instructions

Principal Parts of the Machine

Machine Control Buttons

Control Buttons Overview

Identifies and describes the primary buttons and controls on the sewing machine interface.

Accessories

Standard and Optional Accessories

Lists and illustrates the standard and optional accessories included with the sewing machine.

Before First Use

Power Source

Presser Foot

Attaching and Changing Presser Feet

Guides on how to attach, change, and remove presser feet, including edge/quilting guides.

Winding the Bobbin

Inserting the Bobbin

Threading the Upper Thread

Needle Threader

Drawing Up the Lower Thread

Adjustments

Cutting the Thread

Instructions for cutting the thread after sewing, using the machine's built-in thread cutter.

Two-Step Presser Foot Lifter

Explains the function of the two-step presser foot lifter for thick fabrics.

Sewing

Starting Sewing and Foot Control

Details how to connect the foot control and adjust sewing speed.

Thread Tension

Presser Foot Chart

Matching Needle, Fabric, and Thread

Needle and Feed Dog Maintenance

Replacing the Needle

Step-by-step guide for replacing the sewing machine needle, ensuring proper alignment.

Raising and Lowering Feed Dogs

Instructions on how to adjust the feed dog level for different sewing operations like button sewing.

Operation Buttons

Key Operation Buttons Overview

Explains the primary functions of the Reverse/Auto-lock, Mode Selection/Sound, Stitch Length, and Stitch Width buttons.

Sewing Tips

Sewing Corners

Technique for smoothly turning corners while sewing.

Reverse Stitching

How to use the reverse stitch to secure seams at the beginning and end.

Free Arm Sewing

Utilizing the free arm for sewing tubular items like hems and cuffs.

Sewing Tips

Sewing on Heavy Fabrics

Tips for sewing thick materials, including using a special presser foot feature for even feeding.

Needle Position and Stitch Length

Adjusting Needle Position

How to change the needle position for specific direct patterns using width adjustment buttons.

Adjusting Stitch Length

Guide to shortening or lengthening stitches based on fabric, thread, and needle type.

Zigzag Stitches

Adjusting Zigzag Stitch Width

How to control the width of zigzag stitches for various patterns.

Adjusting Zigzag Stitch Length

Guide to setting the stitch length for neat and satin zigzag stitches.

Stretch Stitches

Stretch Stitch Applications

Describes the use of stretch stitches for flexible fabrics and durable seams.

Straight Stretch Stitch

Details the straight stretch stitch for reinforcing seams and providing durability.

Triple Zigzag Stretch Stitch

Explains the triple zigzag stretch stitch for firm fabrics like denim.

Overcasting Stitches

Overedge Stitch

Information on the overedge stitch for finishing seams and repairing garment edges.

Ric-rac Stitch

Use of the ric-rac stitch for decorative edging and narrow seams under stress.

Overcasting Stitches

Slant Overedge Stitch

Describes the slant overedge stitch for creating narrow, supple seams suitable for stretch fabrics.

Blind Hems

Blind Hemming Techniques

Guides for sewing blind hems on woven and stretch fabrics, emphasizing practice.

Button Sewing

Buttonhole Sewing

Buttonhole Types and Fabric Suitability

Lists different buttonhole types based on fabric thickness and orientation.

Preparing for Buttonhole Sewing

Instructions on marking the fabric, attaching the buttonhole foot, and setting the button size.

Buttonhole Sewing

Sewing Buttonholes

Step-by-step process for sewing buttonholes, including positioning and feeding the fabric.

Buttonhole Sewing

Making Corded Buttonholes

Procedure for creating buttonholes with a cord or heavy thread for added thickness and decoration.

Bar Tack Stitch

Zipper Insertion

Inserting a Lapped Zipper

Step-by-step instructions for inserting a lapped zipper into a garment.

Satin Stitch Sewing

Smocking

Fagoting

Decorative Topstitching

Scallop Stitch

Scallop Edging

Instructions for creating a scallop edge using the sewing machine.

Warning Functions

Warning Beeping Sounds

Explanation of different beep patterns indicating machine status or errors.

Machine Trouble Indicators

Interpreting animation messages and troubleshooting common machine errors.

Maintenance

Cleaning the Hook and Stitching Mechanism

Detailed steps for cleaning the hook, needle plate, feed dogs, and bobbin case for smooth operation.

Trouble Shooting Guide

Disposal

Related product manuals