VERITAS Marie - User Manual

Questions and Answers

A
Amanda HernandezAug 18, 2025
What causes seam puckering on my VERITAS Sewing Machine and how to prevent it?
- M
  Matthew KerrAug 18, 2025
  Seam puckering on your VERITAS Sewing Machine can occur if the needle thread tension is too tight, the needle thread is not threaded correctly, the needle is too heavy for the fabric, or if you are sewing on thin fabric. Loosen the thread tension, rethread the machine, choose a needle to suit the thread and fabric, or sew with a stabilizer material under the fabric.
S
Sara KempAug 20, 2025
How to prevent seam gather or pucker on my VERITAS Marie Sewing Machine?
- T
  twilsonAug 20, 2025
  Seam gather or pucker on your VERITAS Sewing Machine can be caused by a needle that is too thick for the fabric or thread tension that is too tight. Select a finer needle or loosen the thread tension to resolve this.
J
Jonathon ClarkAug 22, 2025
Why is the upper thread breaking on my VERITAS Sewing Machine?
- A
  Alejandra PageAug 22, 2025
  The upper thread may break on your VERITAS Sewing Machine due to several reasons: the machine might not be threaded correctly, the thread tension could be too tight, the thread might be too thick for the needle, the needle may not be inserted correctly (flat side towards the back), the thread could be wound around the spool holder pin, or the needle might be damaged. Rethread the machine, reduce the thread tension, select a larger needle, reinsert the needle correctly, unwind the thread from the spool holder pin, or replace the needle to resolve this.
J
James ReevesAug 25, 2025
What to do if the needle breaks on my VERITAS Marie Sewing Machine?
- J
  Jenna MartinAug 26, 2025
  If the needle breaks on your VERITAS Sewing Machine, it could be due to several reasons: the needle might be damaged, not correctly inserted (flat side towards the back), be the wrong size for the fabric, or the wrong foot is attached. Also, the needle clamp screw could be loose, the presser foot might not be appropriate for the stitch you are using, or the upper thread tension is too tight. Try inserting a new needle correctly, choosing a needle to suit the thread and fabric, selecting the correct foot, tightening the needle clamp screw, attaching the appropriate presser foot, or loosening the upper thread tension.
J
Jeffrey LevineAug 27, 2025
How to fix skipped stitches on my VERITAS Sewing Machine?
- C
  catherinemillerAug 28, 2025
  Skipped stitches on your VERITAS Sewing Machine could occur because the needle is not inserted correctly (flat side towards the back), the needle is damaged, the wrong size needle has been used, the foot is not attached correctly, or the machine is not threaded correctly. Try reinserting the needle correctly, using a new needle, choosing a needle to suit the thread, checking and correctly attaching the foot, or rethreading the machine.
B
Brandy FranklinAug 30, 2025
What to do if the VERITAS Marie Sewing Machine jams?
- P
  Pamela RandallAug 30, 2025
  If your VERITAS Sewing Machine jams, it might be because thread is caught in the hook, or the feed dogs are packed with lint. To resolve this, remove the upper thread and bobbin case, turn the handwheel backwards and forwards to remove thread remnants, or remove the stitch plate and clean the feed dogs.
M
Melissa WrightSep 2, 2025
Why is my VERITAS Marie Sewing Machine so noisy?
- R
  Ryan FordSep 2, 2025
  A noisy VERITAS Sewing Machine could be caused by fluff or oil collected on the hook or needle bar, a damaged needle, or a slight humming sound from the internal motor. Clean the hook and feed dog, replace the needle. A slight humming sound coming from internal motor is normal.
J
Joshua NewmanSep 4, 2025
How to fix loose stitches on my VERITAS Marie Sewing Machine?
- K
  Keith BradleySep 4, 2025
  Loose stitches on your VERITAS Sewing Machine may be due to incorrect threading of the machine or bobbin case, a wrong needle/fabric/thread combination, or wrong thread tension. Check the threading, thread the bobbin case as illustrated, ensure the needle size suits the fabric and thread, and correct the thread tension.
K
Katherine SharpSep 6, 2025
Why is the lower thread breaking on my VERITAS Marie Sewing Machine?
- M
  Michael WilliamsSep 7, 2025
  The lower thread of your VERITAS Sewing Machine might break if the bobbin case is not inserted correctly or is threaded wrong. Remove and reinsert the bobbin case, pull on the thread to ensure it runs easily, and check both the bobbin and bobbin case threading.
A
andrea42Sep 9, 2025
Why are patterns distorted on my VERITAS Sewing Machine?
- M
  Mr. Matthew FergusonSep 9, 2025
  Distorted patterns on your VERITAS Sewing Machine could be due to using the incorrect presser foot or having the needle thread tension too tight. Select the correct foot or loosen the thread tension.