VERITAS Amelia - User Manual

Questions and Answers

C
Claire LiAug 6, 2025
Why does the upper thread break on my VERITAS Sewing Machine?
- J
  johnsdawnAug 6, 2025
  The upper thread may break on your VERITAS Sewing Machine due to several reasons: * The machine might not be threaded correctly, so rethread it. * The thread tension could be too tight; reduce the thread tension. * The thread may be too thick for the needle; select a larger needle. * The needle may not be inserted correctly; remove and reinsert the needle with the flat side towards the back. * The thread might be wound around the spool holder pin; remove the spool holder and unwind the thread. * The needle could be damaged; replace it.
K
Kimberly AguirreAug 11, 2025
What to do if my VERITAS Sewing Machine jams?
- J
  James BrownAug 11, 2025
  If your VERITAS Sewing Machine jams, it might be because thread is caught in the hook. To resolve this, remove the upper thread and bobbin case. Then, turn the handwheel backwards and forwards by hand to remove any thread remnants.
C
Casey FlowersAug 14, 2025
Why is my VERITAS Sewing Machine seam puckering?
- C
  Chloe WeissAug 14, 2025
  Seam puckering on your VERITAS Sewing Machine can occur if: * The needle thread tension is too tight; loosen the thread tension. * The needle thread is not threaded correctly; rethread the machine. * The needle is too heavy for the fabric; choose a needle to suit the thread and fabric. * The stitch length is too long for the fabric; shorten the stitch length.
X
xcarpenterAug 19, 2025
How to stop seam gather or pucker on VERITAS Sewing Machine?
- M
  Mr. Austin FloresSep 12, 2025
  Seam gather or pucker on your VERITAS Sewing Machine can be fixed by: * Selecting a finer needle if the current needle is too thick for the fabric. * Readjusting the stitch length if it's set wrong. * Loosening the thread tension if it's too tight.
B
Brianna RodriguezAug 25, 2025
What causes skipped stitches on a VERITAS Sewing Machine?
- J
  John DixonAug 25, 2025
  Skipped stitches on your VERITAS Sewing Machine may be caused by: * Incorrect needle insertion: Remove and reinsert the needle with the flat side towards the back. * Damaged needle: Insert a new needle. * Wrong needle size: Choose a needle to suit the thread. * Incorrect foot attachment: Check and attach the foot correctly. * Incorrect machine threading: Rethread the machine. * Loose needle clamp screw: Use a screwdriver to firmly tighten the screw.
M
Madison ByrdAug 28, 2025
Why is my VERITAS Amelia Sewing Machine so noisy?
- P
  Patricia ChavezAug 28, 2025
  A noisy VERITAS Sewing Machine can be attributed to several factors: * Lint or oil accumulation on the hook or needle bar: Clean the hook and feed dog as described. * Damaged needle: Replace the needle. In some cases, a slight humming sound from the internal motor is normal. Also, check for thread caught in the hook; if present, remove the upper thread and bobbin case, then turn the handwheel backwards and forwards to remove any thread remnants.
K
kristi78Aug 31, 2025
Why does the lower thread break on my VERITAS Amelia?
- T
  Teresa RoachSep 1, 2025
  The lower thread on your VERITAS Sewing Machine might break because: * The bobbin case is not inserted correctly: Remove and reinsert the bobbin case, then pull on the thread to ensure it pulls easily. * The bobbin case is threaded wrong: Check both the bobbin and bobbin case threading.

VERITAS Amelia Specifications

General

Maximum Stitch Width	7 mm
Start/Stop Button	Yes
Speed Control	Yes
Display	LCD
Feed Dog Drop	Yes
Bobbin	Top-loading
Speed	850 stitches per minute
Warranty	2 years
Type	Electronic
Needle Threader	Automatic