103
IEEE 1725 Battery Safety Statement
• Do not disassemble or open, crush, bend or deform,
puncture or shred.
• Do not modify or remanufacture, attempt to insert foreign
objects into the battery, immerse or expose to water or
other liquids, expose to fire, explosion or other hazard.
• Only use the battery with a charging system that has
been qualified with the system per CTIA Certification
Requirements for Battery System Compliance to IEEE
1725. Use of an unqualified battery or charger may
present a risk of fire, explosion, leakage, or other hazard.
• Replace the battery only with another battery that has
been qualified with the system per this standard, IEEE-
Std-1725. Use of an unqualified battery may present a risk
of fire, explosion, leakage or other hazard. Only authorized
service providers shall replace battery.
• Promptly dispose of used batteries in accordance with
local regulations.
• Avoid dropping the Wearable Product. If the Wearable
Product is dropped, especially on a hard surface, and
the user suspects damage, take it to a service center for
inspection.
• Improper battery use may result in a fire, explosion or
other hazard. For Wearable that utilizes a USB port as a
charging source, the Wearable’s user manual shall include
a statement that the phone shall only be connected to
CTIA-certified adapters, products that bear the USB-
IF logo or products that have completed the USB-IF
compliance program.
To Next Page
Loading...
Need help?
General
