Verizon One Talk User Manual

4 5
Step 3. Set up base station.*
Set up the base station on your desktop or mount it on your wall.
Desktop setup option
Snap base stand connectors into corresponding base station holes.
Wall-mount setup option
Assembling the phone
Note: You can use the handset to monitor the progress of base station
initialization and registration.
Step 1. Insert battery into handset.
The battery comes partially charged and the handset should
automatically turn on. If it doesn’t, press to turn it on.
Step 2. Plug in the handset charger.
Connect charger cradle to power and place handset into cradle.
Note:
• Use Verizon-supplied power adapter (5V/600mA). Third-party power
adapters might damage the handset.
• Charging status can be seen on the top right corner of the LCD screen.
Quick install guide
MAC
SN
MAC
SN
MAC
SN
MAC
SN
59mm 59mm
Battery
* Applies only to the W60B package.

Verizon One Talk Specifications

General

Category	IP Phone
Power over Ethernet (PoE)	Yes
Wi-Fi	No
Bluetooth	No
Headset Jack	Yes
HD Voice	Yes
Features	Call Waiting
Compatible with	One Talk