504PRO_604PRO_o-m2_00 -
504/604 PRO Baler Introduction
INTRODUCTION
This manual explains the proper operation of your machine. Study and understand these instructions thoroughly before operating or maintaining
the machine. Failure to do so could result in personal injury or equipment damage. Consult your Vermeer dealer if you do not understand the
instructions in this manual, or need additional information.
The instructions, illustrations, and specifications in this manual are based on the latest information available at time of publication. Your machine
may have product improvements and features not yet contained in this manual.
Vermeer Corporation reserves the right to make changes at any time without notice or obligation.
Operation, lubrication, and maintenance instructions are included in the two Operator’s and Maintenance Manuals provided with
the machine. The tethered (cabled) manual must remain attached to the machine for ready reference. Store it in the manual storage box when
not in use.
Additional copies of the manuals are available from your dealer. Use the reorder number on the front cover to order additional manuals.
• Copies of this manual are available in Spanish from your dealer. Other languages may also be available.
• Se dispone de ejemplares de este manual en español.
Notice to Owner – You are requested to notify Vermeer Corporation when you have purchased a used Vermeer machine. Notify the Customer
Data Department by telephone: 800-829-0051 or 641-628-3141; email: customerdata@vermeer.com; internet: www.vermeer.com or myvermeer.
com; or, letter: Customer Data Dept., Vermeer Corporation, PO Box 200, Pella IA 50219 USA. Upon request, an owner of a used Vermeer machine
will receive one free set of Operator’s, Maintenance and Parts manuals.
Copyright 2016. All rights reserved.
Vermeer Corporation
1210 Vermeer Road East, P.O. Box 200
Pella, lowa 50219–0200
Orientation: Right and left sides of the machine are determined by facing in the direction of forward travel.
https://tractormanualz.com
To Next Page
Loading...
