EasyManua.ls Logo

Vermes MDS 3000 Series - User Manual

Vermes MDS 3000 Series
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...


Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Vermes MDS 3000 Series and is the answer not in the manual?

Summary

3 SAFETY NOTES

3.1 Obligations and Liability

Outlines manufacturer's liability and user's responsibility for safety, installation, operation, and maintenance.

3.3 Contracted Use

Defines the intended use of the MDS 3200A and lists deviations that void liability.

3.4 Specification and Technical Notes

Provides technical specifications and operating conditions for the MDS 3200A system.

3.5 General Warnings

Lists critical warnings regarding handling cables, spare parts, repairs, and system operation.

3.6 Personnel Qualifications

Specifies the required qualifications and understanding for personnel operating the system.

3.7 Protective Equipment and Safety Clothing

Recommends necessary protective gear for handling aggressive substances or high pressure.

4 PRODUCT DESCRIPTION

4.1.1 Technical Data

Lists detailed technical specifications for the MDC 3200A control unit.

4.5.3 Specification

Lists the technical specifications of the MDV 3200A valve, including quantity, pressure, viscosity, and temperature.

5 INITIAL OPERATION

5.2 Assembling the MDV 3200 A

Step-by-step guide for assembling the MDV 3200A valve components.

5.3 Installation of the MDS 3200 A

Outlines the prerequisites for installing the MDS 3200A system, including power and pneumatic supply.

5.3.1 Installation of the MDC 3200 A

Instructions for installing the MDC 3200A control unit in a 19" rack, emphasizing ventilation.

5.3.2 Valve Installation and Wiring

Details valve mounting, air-cooling connections, and wiring to the control unit.

5.4 The Adjust Procedure

Explains the procedure for adjusting the nozzle unit's position relative to the tappet.

5.5 Initial Liquid Supply

Steps for filling the cartridge and connecting it to the fluid box for initial liquid supply.

5.6 Removing Air Inclusions

Procedure for purging air from the system after cartridge replacement.

5.7 Parameter Input and Start

Guide for entering dispensing parameters and starting the dispensing process.

6 OPERATION

6.1 Triggering a Dispense Sequence

Describes three methods to initiate a dispensing sequence: touch panel, RS-232C, or PLC command.

6.2 Dispensing Modes

Explains four modes (Burst, Single-Shot, Infinite, External) for dispensing multiple dots.

6.3 Dispensing Parameters

Illustrates and describes dispensing parameters like Rising, Open Time, Falling, Delay, and Needle Lift.

6.4 Parameter Value Ranges

Lists the minimum and maximum values for each dispensing parameter and their conversion values.

6.6 Saving and Retrieving Parameter Sets

Instructions for saving and recalling parameter settings from internal memory.

6.9 Switching OFF the MDS 3200 A

Provides the procedure for safely switching off the MDS 3200A system.

8 CLEANING

9 MAINTENANCE

10 ERROR MESSAGES

Vermes MDS 3000 Series Specifications

General IconGeneral
BrandVermes
ModelMDS 3000 Series
CategoryDispenser
LanguageEnglish

Related product manuals