Need help?Do you have a question about the Vermes MDS 3200+ Series and is the answer not in the manual?
Outlines responsibilities of the manufacturer, customer, and operator regarding safety.
Details potential risks and compliance with relevant safety regulations and directives.
Covers technical data, front/back panel, function keys, and menu structure of the control unit.
Describes the composition, explosion view, specifications, types, and features of the MDV valve.
Covers installation of the control unit and valve, including wiring and connections.
Explains the necessary adjustment procedure for proper dispensing.
Guidance on entering dispensing parameters and initiating the process.
Details parameters like Rising, Open Time, Falling, Needle Lift, and Delay.
Defines minimum/maximum parameter values and how to input them.
Details on using the optional nozzle heater for temperature control.
Details on the 9-pin RS-232C interface, pin functions, and commands.
Describes the 15-pin PLC interface, pin functions, and remote adjustment procedures.
Describes methods like pre-purifying, rinsing, and disassembly for cleaning.
Lists and explains various error codes encountered during operation and their solutions.
General| Dispensing Technology | Piezoelectric |
|---|---|
| Power Supply | 24 V DC |
| Operating Frequency | Up to 1000 Hz |
| Dosing Accuracy | ±1% |
| Number of Channels | 1 |
| Material Compatibility | Wide range of fluids including adhesives, solvents |
| Control Interface | RS232, Ethernet |
| Dimensions | Varies by model |
| Weight | Varies by model |
To Next Page
