To Next PageTo Next Page
Need help?Do you have a question about the Vermont Castings Intrepid FlexBurn 2115 and is the answer not in the manual?
General| Fuel Type | Wood |
|---|---|
| Maximum Log Length | 16 inches |
| Flue Outlet | 6 inches |
| EPA Certified | Yes |
| Burn Time | Up to 8 hours |
Lists the certifications, laboratory, report numbers, and standards for the wood appliance.
Provides technical data on heat output, efficiency ratings, and fuel requirements.
Outlines specific installation requirements for mobile home use in the USA.
Specifies the type of ceramic glass used and replacement recommendations.
Advises on chemicals present in the product and combustion byproducts as per California law.
Explains the function and operation of the stove's primary air control and damper.
Guides on performing initial break-in fires to condition cast iron and proper wood burning.
Details methods for loading fuel, including top-loading and front door operation.
Step-by-step instructions for safely and effectively refueling the stove with embers.
Explains the role of andirons in protecting the glass and aiding fire viewing.
Advises on selecting and burning appropriate wood types for optimal performance.
Describes using a surface thermometer to monitor stove temperature and adjust controls.
Provides advice on optimizing air control settings based on installation and desired heat.
Outlines the correct and safe method for removing and disposing of stove ash.
Explains how to measure burning cleanliness via smoke opacity and its implications.
Discusses causes and consequences of negative pressure on stove operation and safety.
Covers essential details on creosote, fuel quality, back-puffing, and draft testing.
Instructions for cleaning, touching up paint, and maintaining the cast iron finish.
Guidance on cleaning spills, stains, and repairing chipped porcelain enamel.
Procedures for cleaning glass and replacing broken panels with correct parts.
Steps for adjusting the damper tension for a proper seal.
Instructions for adjusting the door latch to ensure a secure and tight seal.
Details on replacing worn or compressed fiberglass rope gaskets for sealing.
Guidelines for inspecting and cleaning the chimney and connector for creosote.
A checklist for daily, monthly, and annual maintenance tasks for the stove.
Recommendations for inspecting and cleaning the chimney connector sections.
Information on inspecting, cleaning, and suspecting problems with the catalytic combustor.
Diagnoses and solutions for issues preventing a fire from starting or burning properly.
Identifies causes of rapid burning and suggests corrective actions for control.
Addresses causes for low heat output and provides solutions for improvement.
Explains causes of excessive coal beds and methods to manage burn rates.
A template for recording dates, performed service, and descriptions of maintenance.
Lists and illustrates various parts of the stove for ordering replacements.
Provides contact details for Hearth & Home Technologies and dealer locators.
