Vermont Castings defiant iai User Manual

Provides specific drill and tap sizes for IAI model holes, detailing diagram references.

Initial steps for preparing the stove before disassembling interior parts.

Instructions on removing the primary and secondary air tubes during interior disassembly.

Guidance on detaching the support leg from the baffle component.

Procedure for safely removing the stove's baffle.

Instructions for removing the damper mechanism from the stove.

Steps to detach the smokeshelf component.

How to remove the upper fireback component from the stove.

How to remove the lower fireback component from the stove.

Cleaning procedures for stove parts after interior disassembly.

Installing the lower fireback and secondary air channel screens into their positions.

Placing the upper fireback into position, ensuring tabs overlap correctly.

Installing the smokeshelf and damper components.

Procedure for installing the stove's baffle into its designated slots.

Attaching the support leg to the baffle using the specified hardware.

Installing the secondary air tube extension.

Final steps for interior assembly, including hardware and paint.

Initial preparation steps before disassembling the stove's exterior components.

Steps to loosen and prepare exterior stove castings for removal.

Procedures for removing the exterior parts of the stove.

Instructions for cleaning cast plates after exterior disassembly.

Steps for assembling the stove's main exterior castings.

Continued instructions for assembling the stove's exterior castings.

Installing the fireback and secondary air tube components.

Continuation of fireback and air tube installation steps.

Instructions for installing the left end plate of the stove.

Further steps for installing the left end plate.

Procedure for installing the top plate of the stove.

Instructions for installing the tie rods to secure the stove structure.

Final steps for exterior assembly, including hardware and repainting.