Vermont Castings Dauntless FlexBurn Catalytic User Manual

Vermont Castings • Dauntless FlexBurn Owner’s Manual_R3 • 2020 - ___ • 05/20 13-90-586000c
Owner’s Manual
Operation & Care
INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
Contact your dealer with questions on installation, operation, or service.
NOTE
To obtain a French translation of this manual, please
contact your dealer or visit www.vermontcastings.com
Pour obtenir une traduction française de ce manuel, s’il
vous plaît contacter votre revendeur ou visitez www.
vermontcastings.com
If the information in these instructions is not
followed exactly, a re may result causing
property damage, personal injury, or death.
WARNING
!
• Donotstoreorusegasolineorotherammablevapors
and liquids in the vicinity of this or any other appliance.
• Donotover re - If appliance orchimney connector
glows, you are over ring. Over ring will void your
warranty.
• Comply with all minimum clearances to combustibles
asspecied.Failuretocomplymaycausehousere.
HOT SURFACES!
Glass and other surfaces are hot
during operation AND cool down.
Hot glass will cause burns.
WARNING
!
• Do not touch glass until it is cooled
• NEVER allow children to touch glass
• Keep children away
• CAREFULLYSUPERVISEchildreninsameroomas
replace.
• Alert children and adults to hazards of high
temperatures
• High temperatures may ignite clothing or other
ammable materials.
• Keep clothing, furniture, draperies and other
ammablematerialsaway.
Installationandserviceofthisapplianceshouldbeperformedby
qualiedpersonnel.Hearth&HomeTechnologiesrecommends
HHTFactoryTrainedorNFIcertiedprofessionals.
Dauntless FlexBurn
®
Catalytic / Non-Catalytic
Wood Stove

Vermont Castings Dauntless FlexBurn Catalytic Specifications

General

Type	Wood stove
Fuel Type	Wood
Catalytic	Yes
Maximum BTU Output	Up to 60, 000 BTUs/hr
Maximum Log Length	20"

Summary

Product Listing and Important Safety Information

Appliance Certification

Details on safety certifications and standards met by the wood stove.

BTU & Efficiency Specifications

Performance metrics including BTU output and efficiency ratings for the stove.

California Proposition 65 Warning

Warning regarding chemicals in wood combustion and their potential health effects.

Mobile Home Installation Requirements

Specific requirements for safely installing the stove in a mobile home.

Glass Specifications

Information on the type of glass used and replacement procedures for the stove.

Fire Risk Warning

Critical safety warnings related to fire hazards and improper operation of the appliance.

Operating Instructions

Dauntless FlexBurn® Controls

Explanation of the primary air control and damper for regulating fire and combustion.

Conditioning Your Stove

How to break in the cast iron stove to prevent thermal shock damage during initial use.

Wood Burning Operation

Proper procedures for burning wood, correct fuel types, and essential safety precautions.

Ways to Add Fuel

Methods for loading wood into the stove, including top-loading and front-loading doors.

Ash Disposal

Safe and proper procedures for removing and disposing of stove ashes to prevent hazards.

Opacity (Visible Smoke)

How to measure and interpret smoke output for ensuring clean and efficient burning.

Negative Pressure

How house ventilation, like exhaust fans, can affect stove draft and safety.

Important Information

Key details on creosote, fuel quality, draft testing, and safe wood burning practices.

Maintenance

Cleaning and Replacing Glass

Instructions for cleaning stove glass and replacing it if it becomes damaged.

Damper Adjustment

How to adjust the damper tension for a proper seal within the stove.

Door Latch Adjustment

Steps to adjust the door latch for a secure seal and prevent air leaks.

Gasket Replacement

Guide to replacing fiberglass rope gaskets to ensure effective seals on moving parts.

Chimney System Maintenance

Importance of inspecting and cleaning the chimney system to prevent creosote buildup and fires.

Catalytic Element Maintenance

Information on the catalytic combustor's function, cleaning, and replacement for optimal efficiency.

Troubleshooting Guide

Start Fire Problems

Common issues encountered when starting a fire and their corresponding solutions.

Fire Burns Too Fast

Causes and solutions for a fire that burns too quickly, impacting heat control.

Low Heat Output

Reasons for insufficient heat output from the stove and methods to resolve them.

Excessive Coal Bed

Addressing issues related to an excessive or improperly managed coal bed in the firebox.

Reference Material

Service & Maintenance Log

A template to record dates, performed by, and description of all service and maintenance performed.

Service Parts & Accessories

Illustrated list of available replacement parts and accessories for the Dauntless stove.

Contact Information

How to contact Vermont Castings for support and to find your nearest dealer.