Need help?Do you have a question about the Vermont Castings Vigilant and is the answer not in the manual?
General| Type | Wood Stove |
|---|---|
| Material | Cast Iron |
| Fuel Type | Wood |
| Efficiency | 75% |
| Maximum Log Length | 18 inches |
| Flue Outlet | 6 inches |
| Finish | Enamel |
Checks for correct chimney height and roof clearance according to codes.
Inspects chimney cap for damage and recommends repair or rebuilding.
Identifies creosote stains as indicators of flue damage needing inspection.
Highlights the need to remove any blockages found within the flue.
Details required clearances between chimney and combustible walls.
Addresses safe clearances for the smoke chamber from framing.
Notes creosote buildup requires thorough chimney cleaning.
Emphasizes repairing structural fireplace damage before use.
Advises on replacing or remortaring loose bricks or mortar.
Recommends repairing or replacing loose or broken clean-out doors.
Discusses stove efficiency, combustion principles, and side-draft operation.
Explains fuel and oxygen limiting as control systems for stove output.
Details primary and secondary air systems for efficient combustion.
Describes the function and operation of the stove's damper.
Explains the air flow design specific to the Intrepid model.
Details how to operate the Intrepid in updraft mode.
Details how to operate the Intrepid in side-draft mode.
Provides instructions for ash removal for the Intrepid.
Describes using the Intrepid as a fireplace.
Explains the thermostat controls for the Intrepid.
Instructions for setting up the stove, including heat shields and legs.
Step-by-step guide for installing the bottom heat shield.
Guidance on optimal stove placement for heat distribution and clearances.
Details required clearances from combustible materials for safe installation.
Information on chimney selection, installation, and requirements.
Guidelines for selecting and installing stovepipe and connectors.
Recommendations for protecting floors from heat and embers.
Step-by-step instructions for building the first fire and break-in period.
Guidance on daily operation, including damper and thermostat use.
Instructions for using the stove in fireplace mode.
Tips for maximizing stove performance and efficiency.
Procedures for safely removing ashes from the stove.
Guidance on cleaning the stove interior and components.
Importance and methods for cleaning the chimney and flue.
Initial checks and maintenance for new stove installations.
Adjustment and maintenance of door handles and latches for an airtight seal.
Importance of gaskets and replacement procedures for sealing.
Cleaning and care of glass doors, including replacement advice.
Addresses common operational issues like poor fire holding, smoking, and back puffing.
Provides detailed measurements for different stove models for planning installation.
Outlines the warranty coverage for stove parts and labor.
Details warranty for parts subject to normal wear and tear.
Specific warranty terms for the catalyst component.
Lists conditions and actions that void the warranty.
Instructions on how to claim warranty service and required information.
To Next Page