Vermont Castings Intrepid 2 User Manual

Intrepid 2
Intrepid 3
Model Nos. V 10 / V10-3 NAT GAS
Model Nos. V12 / V12-3 L.P.G
DECORATIVE COAL EFFECT GAS
STOVE
USER INSTRUCTIONS
This appliance is only for use on Natural Gas (G20) at a supply
pressure of 20 mbar in GB / IE (Model No. V10/V10-3)
or
Propane G31 at a supply pressure of 37mbar in GB / IE (Model
No. V12/V12-3)

Vermont Castings Intrepid 2 Specifications

General

Fuel Type	Wood
Heating Capacity	Up to 1, 200 sq. ft.
Maximum Log Length	16 inches
Weight	320 lbs
EPA Certified	Yes
Flue Size	6 inches

Summary

USER INSTRUCTIONS

CONDITIONS OF INSTALLATION

ABOUT YOUR NEW INTREPID GAS STOVE

IMPORTANT SAFETY INFORMATION

Critical safety advice for operation and maintenance, including fireguard use and servicing.

OPERATING THE STOVE

FITTING THE REMOVEABLE HANDLE TO THE STOVE DOOR

Instructions on attaching and removing the stove door handle for safe operation and to prevent overheating.

SPILLAGE MONITORING SYSTEM

CLEANING

Cleaning cast iron painted surfaces (Classic Black)

Guidance on cleaning and touching up classic black cast iron surfaces using specific paints and cloths.

Cleaning porcelain enamel surfaces (Red enamel or Forest Green)

Instructions for cleaning porcelain enamel surfaces, advising against harsh chemicals and abrasives.

Cleaning the fuelbed

How to clean fuel bed components and coals, emphasizing gentle brushing and avoiding water or cleaning agents.

Cleaning the glass

Instructions for cleaning the stove glass using warm water, avoiding harsh chemicals and abrasives.

Cleaning the griddle on the top of the stove

Method for cleaning the griddle, recommending wire wool for rust and deposits on this model.

SECTION 3 ASSEMBLING THE CERAMICS, AND FUEL BED

USER REPLACEABLE PARTS