Verona VDFSEE365 Series - User Manual

ELECTRIC RANGE
for residential use only
Models: VDFSEE365..
INSTALLATION INSTRUCTIONS
IMPORTANT - PLEASE READ AND FOLLOW
• Before beginning, please read these instructions completely and carefully.
• Do not remove permanently afxed labels, warnings, or plates from the product. This may
void the warranty.
• Please observe all local and national codes and ordinances.
• Please ensure that this product is properly grounded.
• The installer should leave these instructions with the consumer who should retain
for local inspector’s use and for future reference.
Electrical installation must be in accordance with the National Electrical Code, ANSI/NFPA70
- latest edition and/or local codes.
IN CANADA: Electrical installation must be in accordance with the current CSA C22.1
Canadian Electrical Codes Part 1 and/or local codes.
R
FOR INSTALLER ONLY
THIS RANGE IS FOR RESIDENTIAL USE ONLY
Some models are supplied with a protective lm on steel and aluminium
parts. This lm must be removed before installing/using the appliance.

Summary

INSTALLATION INSTRUCTIONS

IMPORTANT - PLEASE READ AND FOLLOW

Crucial initial instructions for safe and correct appliance installation.

TOOLS NEEDED FOR INSTALLATION

Lists essential tools required for appliance installation, not supplied with the unit.

GENERAL INFORMATION

ELECTRICAL GROUNDING INSTRUCTIONS

Details mandatory grounding procedures for personal safety and compliance.

REPLACEMENT PARTS

Information on obtaining authorized replacement parts for servicing the appliance.

1 installation

PROXIMITY TO SIDE CABINETS

Specifies required clearances around the range for safe installation with cabinets.

ISLAND TRIM AND BACKGUARD

Instructions for fitting the island trim or backguard accessory to the appliance.

PROXIMITY TO SIDE CABINETS STANDARD INSTALLATION AND ISLAND INSTALLATION

Details cabinet clearances for both standard and island installation configurations.

FITTING THE ADJUSTABLE FEET

Step-by-step guide for attaching and securing the adjustable feet to the cooker base.

LEVELLING THE COOKER

Instructions on how to adjust the cooker's feet to ensure it is level.

MOVING THE COOKER

Safety precautions and methods for safely moving the appliance during installation.

INSTALLING THE ANTI-TIP BRACKET

Comprehensive steps for installing the anti-tip device to prevent range tipping.

2 electrical connection

ELECTRICAL REQUIREMENTS

Outlines mandatory electrical codes and qualifications for installation.

Voltage and Power Consumption

Specifies the appliance's voltage, frequency, and power consumption ratings.

ELECTRICAL CONNECTION WITH POWER CORD

Instructions for connecting the appliance using a power supply cord.

ELECTRICAL CONNECTION WITH CONDUIT

Instructions for connecting the appliance using conduit for hardwiring.

PERMANENT CONNECTION (HARD WIRING)

Details on hardwiring the appliance, including 4-wire and 3-wire methods.

WIRING DIAGRAM

ELECTRIC DIAGRAM KEY

Explains the symbols and abbreviations used in the appliance's wiring diagram.

Verona VDFSEE365 Series Specifications