Veroval Compact BPW 22 - Memory Function

63
English
EN
If you wish to stop the measurement for any reason, simply press
the START/STOP button . The inflation or measurement pro-
cess is interrupted and cuff pressure is automatically released.
■ If this symbol is shown in the display, the device has detected an
irregular heartbeat during the measurement. However, the measure-
ment may also have been interrupted by body movement or speaking.
It is best to repeat the measurement. If you see this symbol regularly
when measuring your blood pressure, we recommend that your doctor
checks your heart rhythm.
6. Memory function
User memory
■ The Veroval
®
BPW 22 stores up to 100 measurements in each user
memory. Once the memory is full, the oldest value is deleted.
■ Memory recall is activated by pressing the or button when the
device is switched off. For values saved in the first user memory, press
the button, for the second user memory press the button.
Average values
■ After selecting the respective user memory, the cor-
responding symbol
or and an A appear on the
display. The average value of all the data stored for
that particular user memory is displayed (see Fig. 1).
■ By pressing the
button again (or the button
if you are in user memory 2), the average values
for all morning measurements ‘AM’ (5 am to 9 am)
taken over the last 7 days are shown.
Fig. 1