Veroval Compact BPW 22 - Explanation of Error Messages

65
English
EN
7. Explanation of error messages
Error that occurred Possible causes Remedy
Monitor cannot be
switched on
Batteries are missing, positioned incorrectly or flat. Check batteries. If necessary, replace with two new identical
batteries.
The measuring signals could not be detected at all or
read correctly. This can be caused by applying the cuff
incorrectly, by moving or talking, or by a very weak pulse.
Check that the cuff has been positioned correctly. Do not talk
or move during measurement.
E2
Incorrect measurement due to movement. Do not talk or move during measurement.
E3
The cuff was not applied correctly. Check that the cuff has been positioned correctly.
E4
Error during measurement. Contact customer service if this error message appears.
E5
Inflation pressure is higher than 300 mmHg. Please rest for at least 1 minute, then take the measurement
again.
E6
A system error has occurred. Contact customer service if this error message appears.