Verseo e-smooth - How to Use Your e-SMOOTH

I Thoroughly clean skin as described on page 6.
I
Apply conductive gel on to area to be treated.
Lightly smooth over skin. You do not have to rub
gel right into $_lin (Fig 1)
I Switch on unit and select Face Roller mode.
I Making sure your finger and thumb are in contact
with silver conductive band, place roller tip on area upper Lip
to be treated (Fig 2).
I Unit will bleep once when roller touches skin and
green contact LED will come on together with blue
LEDs.
I Treatment area should be 2 to 3 square
centimetres.
I Gently roll the roller tip back and forth over area chin
to be trepted making sure the ro ll er tip does not
lose contact with the skin .
I A
treatment cycle contains 3 x 20 second
treatments. However th ere is a 1 O second rest
period between each 20 second treatment.
During the rest period contact green and blue LEDs
will flash. Total treatment cyc le 90 seconds.
I At the end of the treatment cycle the unit will
Bleep 3 times and switch off.
Fig 1
I Gent ly pull out hairs in direction of growth using tweezers provided.
I After treating one area move on to another area.
Eyebrows
Fig 2
Do not exceed 2 treatment cycles of 90 seconds in the same area per day. Do not exceed 2
treatment cycles per day for more than 5 days per week in the same 2 to 3 cm square area .
8