11
Switch between RGB (regular) and IR (night visio
video
12
Change the IR video between Black for hot or
White for hot
Never press the deploy camera button while the UAV is on the ground. This may damage your
camera.
The VCS is a touch-screen laptop. The touch screen function can be used to activate the Object Tracking
feature. To track an object simply tap on the object you want to track. When tracking an object the camera
will remain fixed on this object for as long as it can.
When tracking an object the operator should be aware that the camera will reach its rotation limit near the
rear of the vehicle and will not be able to rotate any further. In this situation, the camera should be manually
rotated to the other extreme to resume tracking.
For optimal object tracking, it is recommended to ask the pilot to loiter directly over the object of
interest. This prevents the need for the camera to rotate continuously and will allow constant object
tracking.
Selecting a known camera from the options dropdown allows you to generate a grid pattern based on the
camera's specifications.
Landscape/Portrait - Specifies the orientation that the camera is placed on the vehicle.
Image Overlap - Allows you to specify the amount of overlap you want between each image.
Altitude - Selecting this value allows you to specify the altitude for the survey. The ground resolution will
be calculated and shown for the specified altitude.
To Next Page
Loading...