Vertical LDP-9030D User Manual

Fixed Feature button definition
LDP-9030D Digital Telephone Description Quick Guide
Button Description
3 Soft Used in conjunction with fixed and flexible features, and the function changes in
relation to call progress, as indicated on the LCD display.
Page Used to change more additional functions on the LCD display .
Trans/PGM This button is used to initiate a call transfer (TRS) or to enter programming
mode (PGM).
Speed Used to access speed dialing, speed programming, save number redial, and
last number redial.
DND The DND (Do Not Disturb) feature blocks all incoming calls. When DND is
active, the red LED in this button is illuminated.
Call Back A station can initiate a call back request to a busy station. Once that station
becomes idle, the initiating station is signaled.
Mute Toggle outgoing audio; red LED illuminates.
Volume The volume button adjusts the audio levels for ringing, handset and
speakerphone functions.
Speaker Speaker toggles the speakerphone state, and the red LED is illuminated when
the speakerphone is active.
Hold/Save This button is used to put a call on hold or save information when programming.
Flexible Some flexible buttons are pre-programmed in the system for line appearances,
loop functions etc. The remaining flexible buttons can be user-programmed.
Visual Ringing LED Illuminates when the phone is ringing.
LCD Display Displays information about telephone status, dialing directories,and test
message information.
Hands-free Microphone Microphone is used for hands-free speakerphone function.

Vertical LDP-9030D Specifications

General

Brand	Vertical
Model	LDP-9030D
Category	IP Phone
Language	English

Summary

Digital Telephone Features

3 Soft Button

Used with fixed/flexible features, function changes with call progress as indicated on the LCD display.

Page Button

Used to change more additional functions on the LCD display.

Trans/PGM Button

Initiates call transfer (TRS) or enters programming mode (PGM).

Speed Button

Accesses speed dialing, speed programming, save number redial, and last number redial.

DND Button

Blocks all incoming calls; red LED illuminates when active.

Call Back Button

Initiates a call back request to a busy station for a signal when idle.

Mute Button

Toggles outgoing audio; red LED illuminates.

Volume Button

Adjusts audio levels for ringing, handset, and speakerphone functions.

Speaker Button

Toggles speakerphone state; red LED illuminates when active.

Hold/Save Button

Places a call on hold or saves information during programming.

Flexible Button

Pre-programmed or user-programmable for line appearances and loop functions.

Visual Ringing LED

Illuminates to indicate when the phone is ringing.

LCD Display

Displays telephone status, dialing directories, and test message information.

Hands-free Microphone

Used for the hands-free speakerphone function.

User Operations

Answering Calls

Instructions for answering calls while idle, busy, or at another station.

Call Management Features

Covers Do-Not-Disturb, Call Forwarding, Camp-On, Last Number Redial, and System Speed Dial.

Speed Dialing and Programming

Procedures for entering and assigning station speed dial numbers.

Call Transfer and Hold

Steps to transfer an active call or place a call on hold.

Conference Calls

Instructions for establishing, holding, retrieving, and exiting conference calls.