Quick Start Guide
Setup is fast
1. You must use a 24 button phone or PCAdmin
to administer the system.
2. Plug-in the 24 button SBX phone to the port
DK #1
3. Install the optional modem and voicemail
auto attendant boards to slot CN4 and CN5,
respectively.
2.
Initialize the system
1. System must be OFF.
2. Place RED/WHITE color SW2 (BATT) in the ON
position
3. Plug-in the 24 button SBX phone to the port
DK #1
3. Install the optional modem and voicemail
auto attendant boards to slot CN4 and CN5,
respectively.
1.
3.
Download latest PCAdmin for Windows from http://vconnect.vertical.com
MBU
MBU
Modem board
VM/AA board
VMIB
4. Plug in the AC power cord to the KSU and turn
the power on.
5. Access system programming by pressing
TRANS/PGM, *, #. The password is blank by
default.
Copyright 2008, Vertical Communications Inc
4.
Default passwords (KSU)
Admin from keyset - Blank
Admin from PCAdmin - Blank
RS-232 board trace - jennie
RS-232 maintenance - brandy
(PCAdmin)
Default username - administrator
Password: 0000
RS-232 Port settings
Baud rate - 19200
Parity - none
Stop bits - 1
Flow control - none
Default IP addresses
KSU - 192.168.1.1
VOIB (VoIP card) - 0.0.0.0
To Next Page
General
