Vertiv Avocent ACS6000 Command Reference Guide

2 CLI COMMAND SET
2.1 Commands Used for the CLI
This chapter describes the general commands used when accessing the console server with the
command line interface.
NOTE: Most of the commands work from any location when the path to the command parameter is
included.
NOTE: The word “node” refers to an entity such as a route, host or user, which can be added,
configured or deleted.
2.1.1 add
Add a node.
Syntax:
--:- / cli-> add <Path>
Example:
--:- / cli-> add network/hosts
--:#- [hosts] cli->
2.1.2 cd
Change directory (level).
Syntax:
--:- / cli-> cd <Path>
Example:
--:- / cli-> cd access
Displays the following:
--:- access cli->
Example:
Vertiv | Avocent® ACS6000 Advanced Console Server Command Reference Guide | 7

Vertiv Avocent ACS6000 Specifications

General

Brand	Vertiv
Model	Avocent ACS6000
Category	Server
Language	English