To Next PageTo Next Page
Need help?Do you have a question about the Verts Loisirs VLB135H97 and is the answer not in the manual?
Read instructions carefully, familiarize with controls, and proper use.
Reduce fire risk, inspect area, and proper refueling.
Safe practices for operating the machine, including slopes and general rules.
Keep equipment in safe working condition and safe storage procedures.
Instructions for mounting the steering wheel and its components.
Steps to assemble the steering extension shaft.
Instructions for mounting and adjusting the seat.
Steps and precautions for installing the battery.
Identifies and explains the location and function of various controls on the machine.
Explains the function of the light switch.
Explains how the throttle controls engine speed and blade rotation.
Explains the operation of the brake and clutch pedal.
Describes the four positions of the motion control lever.
Explains how to engage and disengage the cutting unit drive.
Instructions for quickly lifting and lowering the cutting unit.
Explains the three positions of the ignition key.
Step-by-step instructions for engaging and releasing the parking brake.
How to use the free-wheel control for towing or moving the tractor.
Instructions for using the choke control for cold starting.
Instructions and warnings for refueling the engine with petrol.
How to check and maintain the engine oil level.
Regular checks and correct tire pressure specifications.
Steps to safely start the engine, including lever positions and choke use.
Adjusting the throttle control for a warm engine.
How to turn the ignition key to start the engine.
Lower cutting unit, release brake, engage cutting unit, and select speed.
Steps for warming up the transmission before driving in cold conditions.
Steps to remove trapped air from the transmission before operation.
Steps to turn off the engine safely, including disengaging attachments and using the ignition key.
Warnings about leaving the machine unattended with the ignition key inserted.
Essential safety steps before performing any maintenance or adjustment on the engine or cutting unit.
Steps to raise, remove, and reinstall the engine hood.
Routine checks to perform before each use of the machine.
Proper cleaning procedures and warnings about using high-pressure washers.
Steps for servicing the engine, specifically oil drain.
Table to record dates of completed maintenance services based on hours or as needed.
Explains the Operator Presence System and Reverse Operation System and their safety functions.
How to keep blades sharp, replace damaged ones, and the procedure for blade removal.
Instructions for measuring and adjusting the brake linkage for proper function.
Step-by-step instructions for safely removing the cutting unit from the tractor.
Step-by-step instructions for installing the cutting unit onto the tractor.
Step-by-step guide to replace the drive belt for the cutting unit.
How to adjust the cutting unit for proper alignment with the direction of travel.
How to adjust the cutting unit for side-to-side levelness.
How to adjust the motion control lever for the correct neutral position.
Keeping the fan and cooling fins clean for proper transaxle cooling.
Information on transaxle fluid and service.
Common issues with the engine not starting, running unevenly, or overheating.
Problems with the battery not charging or the lighting system not functioning.
Troubleshooting machine vibration, unbalanced blades, and uneven cutting results.
Steps for cleaning, maintenance, and storing the machine after the mowing season.
Information needed when ordering spare parts or requesting warranty service.
General| Brand | Verts Loisirs |
|---|---|
| Model | VLB135H97 |
| Category | Lawn Mower |
| Language | English |
