In case of starting troubles, see that the
engine be not flooded, i. e. mixture be
not dripping from carburettor.
Engine flooding can be overcome by
either one of following methods:
- Push-start the scooter; engage se-
cond gear, depress the clutch and
push the machine to a certain speed;
suddenly release the clutch lever
and pull it back as soon as the en-
ok gine goes on.
Close the fuel tap, remove the
sparkplug and rotate the engine
by means of the kickstarter, wipe
the plug dry and screw it back. Open
the fuel tap and kick the starting
lever.
I._I
Fig. 11 - Gear change
I. 1st gear - 2. 2nd gear - 3. 3rt! gear - O. NeUlral
- 21
To Next Page
Loading...
