Need help?Do you have a question about the Vespa 1962 150 and is the answer not in the manual?
General| Displacement | 145.45 cc |
|---|---|
| Bore x Stroke | 57 mm x 57 mm |
| Fuel System | Carburetor |
| Ignition | Magneto |
| Clutch | Wet multi-plate |
| Rear Suspension | Coil spring with hydraulic damper |
| Front Brake | Drum |
| Rear Brake | Drum |
| Tire Size Front | 3.50 - 10 |
| Tire Size Rear | 3.50 - 10 |
| Cooling System | Air-cooled |
| Engine Type | Single-cylinder, two-stroke |
| Frame | Steel monocoque |
| Gearbox | 4-speed manual |
| Front Suspension | Single-sided trailing arm |
Details on fuel efficiency and maximum speed according to CUNA standards.
Technical details including bore, stroke, displacement, compression ratio, and lubrication.
Describes the engine-to-wheel transmission ratios and components like clutch and gearbox.
Details the fuel feeding circuit, carburettor, and ignition diagram components.
Guidance on fuel mixture, running-in speeds, and initial maintenance checks.
Instructions for starting the engine, including using the starter device and push-starting.
Troubleshooting steps for common problems causing difficulty in starting the engine.
Diagnosing and fixing issues related to the spark plug and breaker points.
Identifying causes and solutions for poor performance, high fuel consumption, etc.
To Next Page
