Electrical Requirements
IMPORTANT: Observe all governing building codes and city
ordinances. A 120 volt, 60 Hz., AC only, 15-amp, fused electrical
circuit is required.
It is the customer’s responsibility:
• To contact a qualied electrical installer.
• To assure that the electrical installation is adequate and
in conformance with National Electrical Code, ANSI/ NFPA
70 — latest edition*, or CSA Standards C22. 1-94, Canadian
Electrical Code, Part 1 and C22. 2 No. 0-M91 - latest edition**
and all local codes and ordinances.
13
To Next Page
Loading...