Vestax HANDY TRAX USB User Manual

SPECIFICATION
MOTOR/TURNTABLE
DRIVE SYSTEM : BELT RIVE PITCH RANGE : ± 10 %
MOTOR : DC SERVO MOTOR WOW & FLUTTER : < 0.25 %
PLATTER : 185 MM S/N RATIO : > 45 dB
SPEED : 33 1/3 . 45 . 78 rpm
TORN ARM
TYPE : DYNAMIC BALANCE SYSTEM
CARTRIDGE : CZ800-9 (Ceramic)
REPLACEMENT STYLUS : Vestax VR-1SS (Sapphire)
SPEAKER
SIZE : 77 mm IMPEEDANCE : 8 ohm
MINIMUM SYSTEM REQUIREMENTS (When Using USB)
Windows
• CPU Intel Pentium III 450MHz more
• OS Windows XP / Vista
• USB PORT (Please avoid connecting to a USB hub)
• RAM 512MB more
Macintosh
• CPU Power Macintosh G4 more
• OS Mac OS X 10.4 more (recommended 10.5)
• USB PORT (Please avoid connecting to a USB hub)
• RAM 512MB more
POWER SUPPLY • OTHERS
POWER SUPPLY : AC 12 V 300mA or UM-1 X 6
LIFE SPAN OF BATTERIES : About 65 hours (Alkaline batteries)
POWER CONSUMPTION : 7 W
DIMENSIONS : W 370 X D 260 X H 97 mm
WEIGHT : 2.0 kg (Batteries not included)
SERVICE MANUAL
MODEL: HANDY TRAX USB

Vestax HANDY TRAX USB Specifications

General

Brand	Vestax
Model	HANDY TRAX USB
Category	Turntable
Language	English

Summary

SPECIFICATION

MOTOR/TURNTABLE

Technical details of the motor and turntable system.

TONE ARM

Specifications related to the tone arm.

SPEAKER

Details on the built-in speaker specifications.

MINIMUM SYSTEM REQUIREMENTS (When Using USB)

Computer system requirements for USB functionality.

POWER SUPPLY • OTHERS

Information on power supply and miscellaneous items.

DISASSEMBLY PROCEDURES

REMOVAL OF TOP COVER AND BOTTOM BOARD (Fig. 1)

Instructions for removing the top cover and bottom board.

REMOVAL OF MOTOR (Fig. 2)

Steps to detach the motor from the unit.

REMOVAL OF TONE ARM AND USB PCB ASS'Y (Fig. 3)

Procedure for removing the tone arm and USB PCB.

REMOVAL OF CONTROL / POWER / P/S PCB ASS'Y AND SPEAKER (Fig. 4)

Steps to remove control, power, and speaker components.

PACKING DIAGRAM

WIRING DIAGRAM

EXPLODED VIEW

PT-1 MOTOR PCB

PT-1 USB PCB