Need help?Do you have a question about the VESTEL 11AK19 and is the answer not in the manual?
Safety procedures for working on a powered-off TV set.
Conditions and methods for taking measurements.
Pinout and signal description for SCART 1.
Pinout and signal description for SCART 2.
Details on the TDA884X Vision IF amplifier.
Functionality of the video switching circuits.
Description of the sound processing circuit.
Operation of the sync separator and oscillator.
Processing of color and brightness signals.
Function of the color decoder circuit.
RGB output and black-current stabilization.
Frequency bands covered by the UV1316 tuner.
Frequency bands covered by the UV1336 tuner.
Frequency bands covered by the UV1315 tuner.
Overview of the TEA6415C video switch IC.
Key features of the TEA6415C IC.
Overview of the TDA9830 AM-sound demodulator.
Key features of the TDA9830 IC.
TDA9875 demodulator and decoder details.
Digital Signal Processor functionalities of TDA9875.
Analogue audio processing of TDA9875.
Description of TDA2614 power amplifier.
Description of TDA2615 dual power amplifier.
Description of TDA2616Q dual power amplifier.
Description of TDA8351/8356 vertical output stages.
Key features of TDA8351/8356.
Key features of the TDA6107Q video output amplifier.
Description of the TDA9818 VIF/SIF/FM demodulator.
Key features of the TDA9818 IC.
Features of the SAA4961 comb filter IC.
Description of the SDA525X microcontroller.
Key features of the SDA525X.
Tuning capabilities of the SDA525X.
Description of the ST24C08 EEPROM.
Key features of the ST24C08.
Key features of the TDA1308 headphone driver.
Description of the TDA9855 BTSC decoder and audio processor.
Key features of the TDA9855.
How to access and use adjustment settings.
Procedure for adjusting white balance.
Procedure for adjusting AGC.
Adjusting IF-PLL negative for PLL tuners.
Adjusting IF-PLL positive for PLL tuners.
Adjusting luminance delay for TDA8844.
Adjusting vertical zoom for 110" tubes.
Adjusting vertical scroll for 110" tubes.
Adjusting horizontal shift for 4:3.
Adjusting vertical slope for 4:3.
Adjusting vertical amplitude for 4:3.
Adjusting S-correction for 4:3.
Adjusting vertical shift for 4:3.
Adjusting EW width for 110" tubes.
Adjusting EW parabola width for 110" tubes.
Adjusting EW corner parabola for 110" tubes.
Adjusting EW trapezium for 110" tubes.
Adjusting horizontal shift for 16:9.
Adjusting vertical slope for 16:9.
Adjusting vertical amplitude for 16:9.
Adjusting S-correction for 16:9.
Adjusting vertical shift for 16:9.
Adjusting EW width for 110" tubes.
Adjusting EW parabola width for 110" tubes.
Adjusting EW corner parabola for 110" tubes.
Adjusting EW trapezium for 110" tubes.
Guide to setting various options.
Configuration settings for Option 00.
Configuration settings for Option 01.
Configuration settings for Option 02.
Configuration settings for Option 03.
Configuration settings for Option 04.
Configuration settings for Option 05.
Configuration settings for Option 06.
Configuration settings for Option 07.
Configuration settings for Option 08.
Configuration settings for Option 09.
Configuration settings for Option 10.
To Next Page
General