Need help?Do you have a question about the VESTEL 11AK37 and is the answer not in the manual?
Safety procedure for servicing the TV when it is switched off.
Conditions and requirements for taking measurements during servicing.
Describes the Vision IF amplifier and its PLL demodulator.
Details the QSS sound circuit and AM sound demodulator.
Explains the FM demodulator and audio control for mono sound.
Describes the video processor's input switching capabilities.
Covers sync processing and deflection circuits.
Details chroma and luminance processing for TV signals.
Explains the RGB output stages and video processing functions.
Describes the ST92195 microcontroller and its system features.
Provides channel coverage data for UV1316, UV1336, and UV1315 tuners.
Description of the ST92195 microcontroller.
Details the STV224X video processor IC.
Descriptions of the UV1315, UV1316, and UV1336 tuner ICs.
Descriptions of audio, deflection, and other key ICs.
Detailed pin description for the ST92195 microcontroller.
General description of the UV1315 tuner.
Key features of the UV1315 tuner.
Pin configuration for the UV1315 tuner.
Key features of the UV1316 tuner.
Pin configuration for the UV1316 tuner.
Key features of the UV1336 tuner.
Pin configuration for the UV1336 tuner.
Describes the TDA7269A audio amplifier.
Pin assignments for the TDA7269A amplifier.
Describes the STV9306 vertical deflection IC.
Key features of the STV9306 IC.
Pin assignments for the STV9306 IC.
Describes the STV5112 video amplifier.
Pin assignments for the STV5112 amplifier.
Describes the MC44608 voltage-mode controller.
Details features, protections, and controller functions.
Pin assignments for the MC44608 controller.
Describes the MSP 34xxG multi-standard sound processor.
Key features of the MSP 34XXG sound processor.
Details DSP and analog sections of the sound processor.
Describes the 24C08 EEPROM.
Key features of the 24C08 EEPROM.
Features of the TDA1308 headphone driver.
Pin assignments for the TDA1308 driver.
Describes the TDA7261 audio amplifier.
Pin assignments for the TDA7261 amplifier.
Details the power supply start-up sequence.
Explains voltage regulation in the SMPS.
Describes voltage protection features.
Details over-current protection mechanisms.
Critical safety warnings for power supply servicing.
Describes standby operation and mode transitions.
Details the functions of the main microprocessor IC501.
Explains input processing from remote and front panel controls.
Describes tuning modes and IC501 control.
How to enter and use the service mode.
Video signal path through IC403 to CRT.
Mono and stereo sound signal paths.
Signal paths for AV inputs from SCART.
Line drive generation and line output stage.
Beam current limiter for CRT protection.
Parameters adjustable in the service menu.
Adjusting geometry parameters for 50 Hz and 60 Hz.
Adjusting OSD horizontal position.
Adjusting Teletext brightness.
Configuration options for peripheral features.
Options for reception standards and sound systems.
Video configuration options.
TV feature configuration options.
Channel table selection options.
Service menu items for tuner configuration.
Explanations for tuner setting parameters.
Languages in Group 1 - West.
Languages in Group 2 - West / East.
Languages in Group 3 - West / Turkey.
Languages in Group 4 - East / Cyrillic.
Function of the RED button in service mode.
Function of the GREEN button in service mode.
Function of the YELLOW button in service mode.
Function of the BLUE button in service mode.
Function of the TTX Update button in service mode.
To Next Page
General