To Next PageTo Next Page
Need help?Do you have a question about the VESTEL D4 Series and is the answer not in the manual?
Enhances washing performance, reduces water and energy consumption.
Detects half loads to save water and power for cotton programs.
Interrupts programs to reduce foam levels caused by excessive detergent.
Starts drain routine to prevent flooding if excess water is detected.
Manages load balance during spin to prevent vibration and damage.
Details the washing machine's display, program selector, and function buttons.
Defines abbreviations used for buttons (SW, L, PR) on the control panel.
Step-by-step guide to initiating and performing the automatic test sequence.
Manual execution of tests for washer heater, drain pump, dryer components, and washing algorithms.
Flowchart to diagnose and resolve door lock issues, checking connections and component functionality.
Troubleshooting flowchart for water inlet problems, checking tap, pressure, and valve.
Diagnostic steps for drain pump errors, including filter checks and connections.
Flowchart for overflow errors, inspecting pressure switch, hose, and water intake.
Troubleshooting steps for heater or NTC issues, checking resistance and calcification.
Diagnostic flowchart for motor errors, focusing on connections and component testing.
Troubleshooting steps for Electronic Pressure Sensor (EPS) errors, checking connections and component.
Diagnostic steps for dryer board communication failures, checking ports and cable groups.
Troubleshooting for dryer heater thermostat errors, checking connections and cable groups.
Diagnostic steps for dryer heater thermostat errors, checking communication ports and cable groups.
General