EN -13-
Accessories
Icematic
• Take out the ice making tray
• Fill the water in level of line.
• Place the ice making tray in its original
position
• When ice cubes are formed, twist the lever
to drop off ice cubes into the icebox.
Note:
• Do not ll the icebox with water in order to make ice. It can be broken.
• The movement of the ice maker may be difcult while the refrigerator is running. In such
a case should be cleaned by removing the glass shelves.
Removing the Ice maker
• Take out of the freezer glass shelves
• Remove the icemaker by dragging left or
right on the shelf.
You can remove the icemaker to use a larger
volume of the freezer compartment.
• Do not pass to another adjustment before completing an adjustment.
• Your fridge should be operated up to 24 hours according to the ambient temperature
without interruption after being plugged in to be completely cooled. Do not open doors
of your fridge frequently and do not place much food inside it in this period.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before restart-
ing or re-plugged the unit in order not to damage the compressor.
• Your fridge is designed to operate in the ambient
temperature intervals stated in the standards, ac-
cording to the climate class stated in the information
label. We do not recommend operating your fridge
out of stated temperatures value limits in terms of
cooling effectiveness.
Note:
This appliance is designed to work at 43
o
C ambient temperature with no problem. Below -5
o
C ambient temperature, do not use refrigerator compartment as the foods that you put into
there will freeze. You can continue using freezer compartment.
• This appliance is designed for use at an ambient temperature within the 10°C - 43°C
range.
(Making ice cubes)
Climate class Ambient (
o
C)
T 16 to 43 (
o
C)
ST 16 to 38 (
o
C)
N 16 to 32 (
o
C)
SN 10 to 32 (
o
C)
To Next Page
Loading...
