Step 1: Ensure there is water in the
dirty water bag. Close BOTH the blue
clean water valve the red dirty water
valve (horizontal).
Step 2: Squeeze the red bulb and
release until it fills up with water –
repeat three (3) times.
Step 3: Open the red dirty water valve
(vertical) and dispose the dirty water
away from where it could come into
contact with drinking vessels, cutlery,
or other human contact.
Step 4: Clean dirt o of prefilter using
a so cloth – do not use soap.
Daily cleaning
Note: Water expelled during backwashing is contaminated and
should not come into contact with drinking vessels or cutlery.
5
To Next Page
Loading...
Need help?
General
