Vestergaard LifeStraw Mission User Manual

Step 1: Fill dirty water reservoir with cleanest water available
– fold top to close seal and clip around a sturdy tree branch.
Daily use
red valve
closed
blue valve
open
Step 2: Connect the hose to the dirty water bag and allow
a few minutes for clean water to start flowing from the blue
clean water outlet. Ensure that the red dirty water valve is in
closed position (horizontal) and the blue clean water valve
is in open position (vertical).
Helpful Hint: If water is not flowing or the flow rate
is slow then close the blue clean water valve, open
the red dirty water valve for three (3) seconds and
squeeze the red backwash bulb once.
4

Vestergaard LifeStraw Mission Specifications

General

Brand	Vestergaard
Model	LifeStraw Mission
Category	Water Filtration Systems
Language	English