TABLE OF CONTENTS 9/1/2021 EPT MANUAL
TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Page 1 of 58
EPT-Series Electric Pallet Trucks
Instruction Manual
EPT-45 EPT-30
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading.
If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply with
laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels, and
accessories, call our Technical Service and Parts Department at (260) 665-7586. The Department can also be
contacted online at https://www.vestil.com/page-parts-request.php
.
Electronic Copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-manuals.php
.
TABLE OF CONTENTS PAGE TABLE OF FIGURES PAGE
Specifications 2 Fig. 1A EPT Main Body Components 5
Signal Words 3 Fig. 1B EPT-30 (optional) Scale Components 6
Safety Instructions 3 Fig. 2 EPT-30 Hydraulic Cylinder Assembly 7
Remove the EPT from Shipping Pallet 4 Fig. 3 EPT-30 Drive Wheel Assembly 8
Using the EPT 20-21 Fig. 4A EPT-30 Forks & Carriage 9
Inspection Prior to Use 20 Fig. 4B EPT-30 Forks & Carriage with Optional Scale 10
Operating the EPT 20-21 Fig. 5A Control Yoke & Handle Components 11-12
Lifting & Transporting Loads 21 Fig. 5B Control Yoke & Handle with Optional Scale 13-14
Batteries & Battery Charger 21-22 Fig. 6 Hydraulic Pump & Motor Assemblies 15
Troubleshooting 23-27 Fig. 7 EPT-45 Main Housings & Supporting Structure 16
Changing the Cylinder 28-31 Fig. 8 Removable Battery Box & Components 16
Changing the Throttle
Assembly 32-36 Fig. 9 EPT-45 Cylinder & Fuse Panel 17
Changing the Motor Controller 37
-39 Fig. 10 EPT-45 Fork & Carriage Assemblies 18
Replacing Forward/Reverse Contactor 40-42 Fig. 11 Function Controls, Gauges, & Safety Features 19
Changing the Battery Charger 43-46
Installing Quencharcs 47-48 Inspections & Maintenance 54-55
Changing Drive Wheel Assembly 49-53 Labeling Diagram 56
Record of Satisfactory Condition 54 Limited Warranty 57
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
Website: www.vestil.com e-Mail: info@vestil.com
To Next Page
Need help?
General
