03/10/03 Rev. 3/22/2018 FE, MANUAL
Copyright 2018 Vestil Manufacturing Corp. 1 of 8
FE-Series Fork Extensions
Instruction Manual
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the
packaging; then inspect the product closely to determine whether it sustained damage during transport. If
damage is discovered during the inspection, immediately record a complete description of the
damage on the bill of lading. If the product is undamaged, discard the packaging.
NOTE:
Responsibility for complying with laws, regulations, codes, and non-voluntary standards enforced in the
location where the product is used lies exclusively with the end-user.
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
Web: www.vestilmfg.com e-mail: info@vestil.com
Table of Contents
Notes…………………………………………………………………………………………………………………….. 2
Specifications…………….……………….…………………………………………………………………………….. 3
Fork Extension Features…………………………….…………………………………………………………........... 4
Signal Words…………………………………....………………………………………………………………………. 4
Use Recommendations.……………………………..………………………………………………………………… 5
Inspections………………………………………...…………………………………………………………………….. 5
Using the Fork Extensions..
.................................……………………..………….……………………………...5 – 6
Installation ……………………………………………………………………………..………………………………... 6
[Diagram] Standard Tine Loop………….…………………………………………………………………………….. 6
[Diagram] Optional removable pin tine lock………………………………………………………………………….. 6
Labeling Diagram…………………………….…………………………………………………………………………. 7
Limited Warranty…………………..……………………………………………………………………………………. 8
To Next Page
Need help?
General
