Vetta CYCLE COMPUTER User Manual

CYCLE COMPUTER OWNER'S MANUAL
ENGLISH FRANÇAIS ESPANOL DEUTSCH ITALIANO
˜
Congratulations on your purchase of the new Vetta C-16 cycle computer. Packed with all the features that a
professional rider needs to keep track his workouts, the new C-16 has been redesigned to dramatically
improve its reliability when used off-road. A new sealed case and heavy duty bracket combined with our
new universal sensor (pat. pend.) make the C-16 one of the most durable computers Vetta has ever produced.
DRAWINGS OF PARTS
INTRODUCTION
Head Unit Battery Magnet Rubber ShimsSensor Bracket

Vetta CYCLE COMPUTER Specifications

General

Brand	Vetta
Model	CYCLE COMPUTER
Category	Bicycle Accessories
Language	English

Summary

Magnet, Sensor, and Bracket Installation

Step 1: Mount the Sensor

Mount the Vetta universal S-2 sensor loosely on the fork blade using the provided zip-tie.

Step 2: Position Magnet and Sensor

Adjust magnet and sensor for 1-2mm spacing; magnet top should not exceed sensor arrow.

Step 3: Route Sensor Wire

Route sensor wire up the fork back, securing with electrical tape. Avoid zip-ties.

Step 4: Secure Excess Sensor Wire

Wrap excess wire around brake cable housing, securing with tape for computer shoe reach.

Product Warranty

Warranty Return and Repair Procedure

Procedure for returning the Vetta C-16 cycle computer for repair or replacement, detailing steps for claims.