To Next PageTo Next Page
Need help?Do you have a question about the Vetus WLOCKLP Series and is the answer not in the manual?
Guidance on installing various Vetus waterlock models correctly and securely.
Instructions for fitting the transom exhaust connection to ensure a watertight seal.
Torque specifications for hose clamps on LSS and WLOCKL40/45/50R models.
Torque specifications for hose clamps on LSG models, including bolt loosening.
Methods to prevent coolant water entering the engine due to syphoning.
Instructions for checking the non-return valve on Waterlock LSG models.
General| Type | Waterlock |
|---|---|
| Series | WLOCKLP |
| Application | Marine exhaust systems |
| Inlet/Outlet Diameter | 45 mm, 60 mm, 75 mm, 90 mm |
| Capacity | 3.0 L, 5.0 L |
| Weight | Varies by model |
