1) Work area safety
Keep the work area clean and well-lit. Cluttered and dark areas invite
accidents.
Do not operate machines in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Machines create sparks that
may ignite dust or fumes.
Keep children and bystanders away while operating a machine.
Distractions can cause you to lose control.
2) Electrical safety
Machine plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) machines. Unmodified
plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
Do not expose machines to rain or wet conditions. Water entering a
machine will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the machine. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of
electric shock.
When operating a machine outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk
of electric shock.
If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3) Personal safety
Stay alert. Watch what you are doing and use common sense when
operating a machine. Do not use a machine while you are tired or
under the influence of drugs, alcohol or medication. A moment of
inattention while operating machines may result in serious personal
injury.
Use safety equipment. Always wear eye protection. Safety equipment
To Next Page
Loading...
