The VEVOR Multi-function Tool Stool, model BLC9010, is designed to provide a comfortable and efficient solution for various auto beauty, mechanical repair, and DIY tasks in garages, workshops, or homes. This tool stool aims to reduce physical strain by allowing users to perform low-altitude work while seated, eliminating the need for frequent bending or standing.
Function Description:
The primary function of the Multi-function Tool Stool is to serve as a mobile, ergonomic seat for tasks requiring work close to the ground. It is equipped with a slidable chassis storage rack and two bottle racks, making it an essential tool for car cleaning and maintenance. The stool's design focuses on convenience and accessibility, allowing users to keep necessary tools and supplies within easy reach. It is particularly useful for tasks such as car quick beauty, polishing, waxing, ceramic coating, mechanical maintenance, wheel cleaning, tire and rubber cleaning, and plastic repair. By providing a comfortable seating position, it helps alleviate pressure on the back and knees, which are common issues when performing these tasks while standing or bending.
Important Technical Specifications:
- Model: BLC9010
- Rated Load: 300 lbs (approximately 136 kg)
- Product Weight: 5.6 kg
- Product Size: 670 x 340 x 390 mm
- Casters: Rubber wheel casters with lock mechanism
- Storage Capacity: Can hold 4 bottles of 16 oz (approximately 473 ml each) for easy access.
- Maximum Weight: 300 LB
- Dimensions (approximate): 25.12" x 13" x 12" (This seems to be an alternative representation of the product size, potentially in inches, though the initial "2512" might be a typo for "25.12").
Usage Features:
The VEVOR Multi-function Tool Stool is designed for ease of use and versatility.
- Mobility: Equipped with durable casters and rubber wheels, the stool allows for easy and quick sliding across the garage or driveway, ensuring that the user can move around the workspace without effort. The locking mechanism on the rubber wheel casters provides stability when the stool needs to remain stationary.
- Ergonomic Design: The stool's height is matched to the perfect level for car side decoration or wheel cleaning, enabling users to sit comfortably while performing low-altitude work. This design significantly reduces pressure on the back and knees, enhancing comfort during prolonged tasks.
- Integrated Storage: A key feature is its convenient storage space. It includes a storage drawer and two side storage trays located under the seat. These compartments are ideal for organizing and storing car cleaning tools such as spray bottles, sealants, microfiber towels, sponges, and applicators. This ensures that all necessary items are readily available, eliminating the need to constantly reach for tools. The slidable chassis storage rack and two bottle racks further enhance its utility for car cleaning supplies.
- Assembly: The assembly process involves inserting the wheels into the underside frame and securing them with M8 nuts and washers. The underside frame is then mounted to the stool using M6 screws, washers, and nylon nuts. The tool trays are installed by tilting them towards the inside of the stool until they bear against the inner card position, then pressing them inward and downward until they snap into the metal frame.
- Safety Precautions: Users are advised to read the safety precautions carefully. These include assembling the product according to instructions, wearing safety goggles and heavy-duty work gloves, keeping the assembly area clean and well-lit, and ensuring bystanders are out of the area. It is crucial not to assemble when tired or under the influence of alcohol, drugs, or medication. The product's capabilities apply only to a properly and completely assembled product. It should be assembled on a flat, level, hard, and smooth surface capable of safely supporting a fully loaded seat.
- Use Precautions: To prevent serious injury and death from tipping, users must not stand on the item. The product is not a toy, and children should not be allowed to play with or near it. Users must not exceed the weight capacities and should be aware of dynamic loading, as sudden load movement can create excess load and cause product failure. The stool should only be used on a flat, level, hard, and smooth surface capable of safely supporting a fully loaded seat. It is intended for its specified use only. Before each use, the stool should be inspected, and if any parts are loose or damaged, it should not be used.
Maintenance Features:
While specific maintenance instructions are not detailed, the general advice provided implies a need for regular inspection to ensure the product remains in good working order.
- Inspection: "Inspect before every use; do not use if parts are loose or damaged." This highlights the importance of routine checks for wear and tear, loose fasteners, or any structural damage that could compromise safety or functionality.
- Cleaning: Although not explicitly stated, the nature of the tasks the stool is designed for (auto beauty, mechanical repair) suggests that regular cleaning of the stool, especially its storage trays and surfaces, would be necessary to maintain hygiene and prevent the accumulation of dirt, grease, or chemicals.
- Storage: Proper storage in a clean, dry environment would help prolong the lifespan of the rubber wheels and metal components.
The VEVOR Multi-function Tool Stool is presented as a cost-effective solution, with the brand emphasizing "Tough Tools, Half Price" and expressions like "Save Half" or "Half Price" to indicate potential savings compared to major top brands. Users are encouraged to verify these savings when making a purchase. The product comes with technical support and an e-warranty certificate, accessible via www.vevor.com/support. The manual also states that VEVOR reserves the right to update product technology or software without prior notice, and the actual product appearance may vary from the manual's illustrations.
To Next Page
Need help?
General
