When you press the Alkaline Water Button the second time,comes into
Alkaline Water Level 2 PH adjusting and displaying "1.2"Pressing Purified
Water Button (+)
and Acidic Water Button(-)to do cycle adjustment from 3 to 12.
When you press the Alkaline Water Button the third time,comes into
Alkaline Water Level 3 pH adjusting and displaying "1.3 "Pressing Purified
Water Button(+)and Acidic Water Button(-)to do cycle adjustment from
8,10,12,14,16,18,20,22,to 24. When you press the Alkaline Water Button
the fourth time,comes into Alkaline Water Level 4 pH adjusting and
displaying "1.4"Pressing Purified Water Button(+)and Acidic Water
Button(-)to do cycle adjustment from 18,20,22,24,26, 28,30,32,34,36,to
40
When you press the Alkaline Water Button the fifth time,comes into Acidic
Water Level 1 pH adjusting and displaying "2.1(as shown in
figure)"Pressing Purified Water Button(+)and Acidic Water Button(-)to do
cycle adjustment from 10,12,14, 16,18,20,22,24,26,to 28.
When you press the Alkaline Water Button the sixth time,comes into Acidic
Water Level 2 PH adjusting and displaying "2.2 "Pressing Purified Water
Button(+)and Acidic. Water Button(-)to do cycle adjustment from
18,20,22,24,26,28,30,32,36, to 40
When you press the Alkaline Water Button the seventh time,the buzzer
sounds,and the settings are saved and the ionizer will return to standby on
the Alkaline Water Level 2.
Attention:The higher you set,the higher pH value you get.
To Next Page
Loading...