the power cord or latch.
When inserting the power plug, make sure that it is fully inserted. If the plug
is not fully inserted, it can also cause electric shock or fire. If the latch is
damaged or the socket is loose, do not use it again.
Remove the dust on the power latch regularly. If the dust accumulates on
the power latch for a long time, it will cause an electric shock and cause a
fire due to the humid air. Do not use volatile solvents such as alcohol when
cleaning the machine. Wipe with a cotton cloth dipped in dishwashing
liquid.
Issue 1:The power supply light is not on or LCD screen does not display.
Solution:Please check if electricity is connected properly and re-plug in the
cord.
Issue 2:The machine keeps beeping(alarming).
(Note the symbols on the LCD display while the machine beeping)
Solution:If there is a"H1"displayed on the LCD,it means the tap water
temperature is too high,please turn off the tap water and do not let HOT
water enter the machine.
Issue 3:Touch control panel does not function or respond (but the machine
can still work normally).
Solution:Please unplug the power cord and wait a minute,then plug in the
power cord.After the power is re-applied,the unit should return to normal
operation.Note:do not locate the ionizer near electromagnetic radiation
appliances,ie microwave ovens.
Issue 4:Background light on LCD is not on and the LCD is dark.
Solution:the tap water pressure is LOW,please increase the water pressure
and check if the filter blocked or not.Replace filters as needed.
To Next Page
Loading...