Don't connect it with a water heater.Make sure the inlet water temperature
is below113 Fahrenheit degrees(45 Celsius degrees).Keep the machine
away from high temperatures and direct sunlight.
Don't use water to rinse the machine directly,and don't use alcohol and
other volatilesolvents to wipe it,either.Please use a soft cloth with soapy
water to wipe it gently.Don't use the aluminum or copper container for the
alkaline or acidity water,as the water could be contaminated by these types
of containers.
Don't disassemble the machine &components.Don't block,fold or break the
out let tube.When the machine is working,for the purpose of expelling
water freely,don't keep the acidity water outlet tube in a high place.And the
acidity water tube should be no more than 60cm in length.
Every morning before collecting alkaline water from the ionizer,allow the
water to run for 10~30 seconds to flush out the water in the machine and
filters.And the end of the day,it is suggested to flush for 10-15 seconds in
the "Purified water"level and"Acidic Water"level to prevent scaling.
The ionized alkaline &acidic water should be used as soon as possible
within 24hours.
Don't take medicine with alkaline water,Use purified water.Don't drink
acidic water.
Please disconnect the power plug when not using the machine for long
period.
Please do not damage the power cord and power latch.
1. Ensure that the power cable and power latch are intact.
2. Do not bend or twist the power cable or power latch forcibly.
3. Do not drag the power cord.
4. The power cable cannot bear heavy loads.
5. Do not squeeze the power cable or clip the power cable to a certain
place.
If the use of damaged power cord, latch will cause electric short circuit
phenomenon, resulting in fire. Contact a professional if you need to repair
To Next Page
Loading...