5PCS:+500~-550mv / 7PCS:+500~-650mv
Note:
1.The pH&ORP range,Filter usage life and Flow rate etc is depending on
your local water supply condition.
2.The PH data is laboratory data, different regions are affected by TDS
value, the data may be different, which is a normal phenomenon.
Installation tools:
1.One Phillips screwdriver 2. A paper knife or scissors
3. A hammer drill 4. A table opener 5. A wrench
If there are technical improvements to the product, they will
be included in the new manual without prior notice. If the
appearance and color of the product are changed, the
actual product shall prevail.
Parts and Accessories:
Tap adapter A Tap adapter B Coiler
To Next Page
Loading...