- 3 -
WARRANTY
This instrument is warranted to be free from defects in material and
workmanship for a period of one year. Any instrument found defective
within one year from the delivery date and returned to the factory with
transportation charges prepaid, will be repaired,adjusted, or replaced at no
charge to the original purchaser. This warranty does not cover expandable
items such as battery. If the defect has been caused by a misuse or
abnormal operating condition, the repair will be billed at a nominal cost.
INTRODUCTION
This instrument is a 3
5
/
6
digits true-RMS auto range digital clamp meter
designed to measure DC and AC voltage, DC and AC current, resistance,
continuity, diode,capacitance, frequency, duty cycle, and temperature.
It features inrush current measurement, VFD voltage measurement, VFD
current measurement, non-contact AC voltage detection, relative
measurement, MIN MAX mode, data hold, bar graph, backlight, low battery
indication, automatic power-off, illumination, full-range overload
protection, etc. It is easy to operate and is a useful test tool
SAFETY INFORMATION
This meter has been designed according to IEC 61010 concerning
electronic measuring instruments with a measurement category ( CAT III
1000V ) and Pollution Degree 2.
To Next Page
Loading...
