VEVOR EM4659 User Manual

Technical Support and E-Warranty Certificate www.vevor.com/support
TRMS CLAMP MULTIMETER
USER MANUAL
MODEL:EM4659
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

VEVOR EM4659 Specifications

General

Model	EM4659
Brand	VEVOR
Type	Digital Multimeter
Display	LCD
Continuity Test	Yes
Diode Test	Yes
NCV	Yes
Auto Range	Yes
AC Current Range	0-10A
Frequency Range	0-10MHz

Summary

WARRANTY

INTRODUCTION

SAFETY GUIDELINES

General Warnings

Critical warnings to prevent electric shock or personal injury during operation.

Operational Cautions

Precautions to avoid damage to the meter or equipment under test.

Symbol Meanings

Explanation of common symbols used on the meter and in the manual.

FRONT PANEL OVERVIEW

DISPLAY AND SYMBOLS

Understanding the Display

Explanation of the meter's primary and secondary display elements.

Symbol Explanations

Detailed meanings of various icons and indicators shown on the meter.

MEASUREMENT UNITS

TECHNICAL SPECIFICATIONS

DC and AC Voltage Specifications

Details on ranges, resolution, and accuracy for DC and AC voltage measurements.

DC Current Specifications

Details on ranges, resolution, and accuracy for DC current measurements.

AC Current and Resistance Specifications

Specifications for AC current and resistance measurements.

Frequency and Duty Cycle Specifications

Specifications for frequency and duty cycle measurements.

Capacitance and Temperature Specifications

Specifications for capacitance and temperature measurements.

Test Function Specifications

Specifications for continuity, diode test, and temperature sensor.

OPERATING INSTRUCTIONS

Data Hold and Relative Modes

Using Data Hold and Relative modes for measurement.

MIN MAX Mode

How to capture minimum and maximum values during measurements.

Voltage Measurement Procedures

Instructions for measuring AC, DC, and VFD voltages.

Current Measurement Procedures

Instructions for measuring DC, AC, VFD, and Inrush currents.

Resistance, Diode, and Continuity Tests

Procedures for resistance, diode, and continuity measurements.

Capacitance, Frequency, and Duty Cycle

How to measure capacitance, frequency, and duty cycle.

Temperature and NCV Detection

Instructions for temperature measurement and non-contact voltage detection.

MAINTENANCE AND CARE

General Maintenance Procedures

Cleaning and care instructions for the meter.

Battery Replacement Guide

Steps for safely replacing the meter's batteries.

ACCESSORIES AND INCLUDED ITEMS