VEVOR FX1+2 - Assembly Instructions; 240 Box Assembly

- 4 -
P Entrance Reducer(x1)
Q iron nails (x120)
R Self-tapping screw
M3x12 (×12)
S Acrylic panel window (x3)
ASSEMBLY
240 BOX
1. Installation of 240 box
Step 1: Take two pieces of A1 and two pieces of B1(B1-1&B1-2)
respectively, and connect them with a rubber hammer (note that it is not
allowed to knock them directly, but put a board or cardboard on them and
knock them in evenly).